Reference Guide

Command Modes

• CONFIGURATION

• VLAN INTERFACE

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is

twelve. The maximum number of FIP snooping sessions supported per ENode

server is 32 by default. You can configure up to 64 sessions.

fip-snooping fc-map

Configure the FC-MAP value FIP snooping uses on all VLANs.

C9000 Series

Syntax

fip-snooping fc-map fc-map-value

To return the configured FM-MAP value to the default value, use the no fip-

snooping fc-map command.

Parameters

fc-map-value Enter the FC-MAP value FIP snooping uses. The range is

from 0EFC00 to 0EFCFF.

Defaults 0x0EFC00