Reference Guide

ip address dhcp relay information-option remote-id mac
ip address dhcp relay information-option remote-id mac vendor-
class-identifier
Related
Commands
ip address dhcp — configures an interface to receive its IP address from the
configured DHCP server.
ip address dhcp vendor-class-identifier
Include the vendor-class identifier option (option 60) in DHCP packets sent by the client.
C9000 Series
Syntax
ip address dhcp vendor-class-identifier text
Parameters
vendor-class-
identifier text
Include a user-configurable text string with the hardware-
related information (option 60) in DHCP packets sent by the
client (32 characters maximum).
Default None.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
Usage Information
Use this command to include the vendor-class identifier (option 60) in DHCP
packets sent by the client. This option is used by DHCP clients to identify the
vendor type and configuration of a DHCP client. The vendor-class identifier
includes hardware-related information that identifies the switch and includes a
user-configurable text string .
ip address dhcp vendor-class-identifier relay information-
option
ip address dhcp vendor-class-identifier relay information-
option remote-id mac
Related
Commands
ip address dhcp — configures an interface to receive its IP address from the
configured DHCP server.
764
Dynamic Host Configuration Protocol (DHCP)