Reference Guide

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Usage Information The port-set values are internal port numbers.For more information on the interfaces
and port numbers, see the Debugging and Diagnostics chapter in the Dell
Networking OS Configuration Guide for the C9000 System.
Example
Dell#show hardware mac in-acl pe 8 stack-unit 0 port-set 0
EID 0x00000c00: gid=0x5,
slice=6, slice_idx=0, part =0 prio=0xc00, flags=0x10602,
Installed, Enabled
tcam: color_indep=1024,
Stage
InPort
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
InPorts
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
HiGig
Offset: 320 Width: 1
DATA=0x00000000
MASK=0x00000001
SrcMac
Offset: 89 Width: 48
DATA=0x00000000 08000000
MASK=0x0000ffff ffffffff
action={act=CopyToCpuCancel, param0=0(0), param1=0(0),
param2=0(0), param3=0(0)}
action={act=EtagNew, param0=65772(0x100ec), param1=0(0),
param2=0(0), param3=0(0)}
policer=
statistics=NULL
EID 0x00000bff: gid=0x5,
slice=6, slice_idx=0x1, part =0 prio=0xbff, flags=0x10202,
Installed, Enabled
tcam: color_indep=0,
Stage
InPort
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
InPorts
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
Debugging and Diagnostics
747