Reference Guide

HOL DROPS on COS4 : 0
HOL DROPS on COS5 : 0
Example
(Forwarding-table
mode)
Dell>show hardware forwarding-table mode
Current Settings
Mode : Default
L2 MAC Entries : 160K
L3 Host Entries : 144K
L3 Route Entries : 16K
Related
Commands
clear hardware system-flow — clears the statistics from selected hardware
components.
show system — displays the current status of all the stack members or a specific
member.
show hardware buffer
Display buffer statistics for a specified interface.
C9000 Series
Syntax
show hardware {interface interface [buffer-info | priority-group [group
number | all] | queue [queue number | all]]
Parameters
interface interface Enter the keyword interface then type one of the following interface
types and slot/port or number information:
• For a 1–Gigabit Ethernet interface, enter the keyword
gigabitethernet.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE.
• For a port extender (PE) Gigabit Ethernet interface, enter the
keyword peGigabitEthernet then the pe-id, stack-unit unit
number, and port-id. The pe-id range is 0–255; the stack unit
number range is 0–7; and the port-ID range is 0 –47.
NOTE: The peGigE interface option is only available when the
extended bridge is enabled.
buffer-info Enter the keyword buffer-info to view the total buffer allocated for
the Interface
priority-group
group number |
all
Enter the keyword priority-group and specify a priority group
number or all the priority groups. The range for priority group is from 0
to 7.
Debugging and Diagnostics
739