Reference Guide

Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Related
Commands
show hardware — displays the data plane or management plane input and output
statistics of the designated component of the designated stack member.
clear hardware system-flow
Clear system-flow statistics from a specified line card.
C9000 Series
Syntax
clear hardware system-flow {cp-switch | linecard slot-id | pe
pe-id stack-unit unit-number} [port-set port-pipe counters]
Parameters
linecard slot-id Enter the linecard slot-id parameters to identify the
line card on which you want to clear system-flow statistics.
The range of slot IDs is from 0 to 11.
pe pe-id Enter the pe pe-id parameters to specify the port extender
ID for which you want to clear system-flow statistics.
NOTE: The pe option is only visible when the extended
bridge feature is enabled.
stack-unit unit-
number
Enter the stack—unit unit—number parameters to
specify the stack-unit for which you want to clear system-
flow statistics.
port-set port-pipe
counters
Enter the keywords port-set along with a port-pipe
number, then the keyword counters to clear the system-
flow counters on the selected port-pipe. The range of port-
pipe numbers is: 0 to 2 on line card 0 and 0 to 3 on line
cards 1 and 2.
720
Debugging and Diagnostics