Reference Guide

Commands

banner motd — sets a Message of the Day banner.

banner motd

Set a message of the day (MOTD) banner.

C9000 Series

Syntax

banner motd c line c

Parameters

c Enter a delineator character to specify the limits of the text

banner. The delineator is a percent character (%).

line Enter a text string for your MOTD banner the message with

your delineator. The delineator is a percent character (%).

Defaults No banner is configured.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.1.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command

Usage Information After entering the banner login command, type one or more spaces and a

delineator character. Enter the banner text then the second delineator character.

When the user is connected to the router, if a message of the day banner is

configured, it displays first. If no message of the day banner is configured, the login

banner and prompt appear. After the user has logged in, the EXEC banner (if

configured) displays.

Control and Monitoring