Reference Guide

Usage Information You must save the configuration and reload the system to implement ASF. When

you enter the command, the system sends a message stating that the new mode is

enabled when the system reloads.

banner exec

Configure a message that is displayed when your enter EXEC mode.

C9000 Series

Syntax

banner exec c line c

To delete a banner, use the no banner exec command.

Parameters

c Enter the keywords banner exec, then enter a character

delineator, represented here by the letter c. Press ENTER.

line Enter a text string for your banner message ending the

message with your delineator. In the following example, the

delineator is a percent character (%); the banner message is

“testing, testing”.

Defaults No banner is displayed.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.1.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original Command

Usage Information After entering the banner exec command, type one or more spaces and a

delineator character. Enter the banner text then the second delineator character.

Control and Monitoring