Reference Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Usage Information
In the show output, Rx Bytes displays the number of bytes of control-plane traffic
received, on which queue-based rate limiting is applied. Tx Counters displays the
number of bytes transmitted to a control-plane CPU after queue-based rate
limiting is applied. Drop Counters displays the number of bytes of control-plane
traffic that have been dropped as a result of queue-based rate limiting.
To clear the per-queue counters of rate-limited control-plane traffic at the
aggregated (switch), use the clear control-traffic queue command.
Example
Dell#show control-traffic queue queue-id 0 counters
Queue Rx Counter Tx Counter Drop counter
---------------------------------------------------------
Q0 5000 5000 0
Dell#
Related Command clear control-traffic queue
show cpu-queue rate
Display the rates for each control-plane queue.
C9000 Series
Syntax
show cpu-queue rate [all | queue-id queue-number | range
from_queue to_queue]
Parameters
all Display the rate for all control-plane queues. The CPU
queues range is from 0 to 20.
queue-id queue-
number
Display the rate for a specified control-plane queue. The
CPU queue value range is from 0 to 20.
range
from_queue
to_queue
Display the rate for a range of control-plane queues. The
CPU queue value range is from 0 to 20. Separate the
from_queue value from the to_queue value with a space;
for example, show cpu-queue rate range 8 15.
Defaults Not configured.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
628
Control Plane Policing (CoPP)