Reference Guide

l2qos number Enter the keyword l2qos and then the number of FP blocks
for l2 qos. The range is from 1to 8.
l2pt number Enter the keyword l2pt and then the number of FP blocks
for l2 protocol tunnelling. The range is from 0 to 1.
Ipmacacl number Enter the keyword ipmacacl and then the number of FP
blocks for IP and MAC ACL. The range is from 0 to 6.
ecfmacl number Enter the keyword ecfmacacl and then the number of FP
blocks for ECFM ACL. The range is from 0 to 5.
nlbclusteracl
number
Enter the keyword nlbclusteracl and then the number of
FP blocks for nlbcluster ACL. The range is from 0 to 2. By
default the value is 0 and it supports 8 NLB arp entries
reserved for internal functionality.
Vman-qos|vman-
dual-qos number
Enter the keyword evman-qos and then the number of FP
blocks for VMAN QoS. The range is from 0 to 6.
vman-dual-qos
number
Enter the keyword vman-dual-qos and then the number of
FP blocks for VMAN dual QoS. The range is from 0 to 4.
Ipv4pbr number Enter the keyword ipv4pbr and then the number of FP
blocks for ipv4pbr ACL. The range is from 0 to 8.
Openflow number Enter the keyword openflow and then the number of FP
blocks for open flow (multiples of 4). The range is from 0 to
8.
fcoeacl number Enter the keyword fcoeacl and then the number of FP
blocks for FCOE ACL. The range is from 0 to 6.
Iscsioptacl
number
Enter the keyword iscsioptacl and then the number of
FP blocks for iSCSI optimization ACL. The range is from 0 to
2.
fedgovacl Enter the keyword fedgovacl and then the number of FP
blocks for Fed Gov ACL. The range is from 0 to 8.
vrfv4acl number Enter the keyword vrfv4acl and then the number of FP
blocks for VRF IPv4 ACL. The range is from 0 to 2.
l2acl number
ipv4acl number
ipv6acl number,
ipv4qos number
l2qos numberl2pt
number ipmacacl
number ecfmacl
number
{nlbclusteracl]
[vman-qos |
vman-dual-qos
number] ipv4pbr
numberopenflow
Allocate space to each CAM region.
Enter 4 or 8 for the number of OpenFlow FP blocks.
• 4: Creates 242 entries for use by the OpenFlow
controller (256 total entries minus the 14 entries
reserved for internal functionality)
• 8: Creates 498 entries for use by the OpenFlow
controller (512 total entries minus the 14 entries reserved
for internal functionality)
The fcoe range is 0–6 groups. Each group has 128 entries;
the value given must be an even number. This information is
606
Content Addressable Memory (CAM)