Reference Guide

bgp bestpath as-path multipath-relax
Include prefixes received from different AS paths during multipath calculation.
C9000 Series
Syntax
bgp bestpath as-path multipath-relax
To return to the default BGP routing process, use the no bgp bestpath as-
path multipath-relax command.
Defaults Disabled
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information The bestpath router bgp configuration mode command changes the
default bestpath selection algorithm. The multipath-relax option allows load-
sharing across providers with different (but equal-length) autonomous system
paths. Without this option, ECMP expects the AS paths to be identical for load-
sharing.
bgp bestpath med confed
Enable MULTI_EXIT_DISC (MED) attribute comparison on paths learned from BGP confederations.
C9000 Series
Syntax
bgp bestpath med confed
To disable MED comparison on BGP confederation paths, enter the no bgp
bestpath med confed command.
Defaults Disabled
Command Modes ROUTER BGP
392
Border Gateway Protocol