Reference Guide

Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information
The dot1x profile command configures a dot1x profile to define a list of
trusted supplicant MAC addresses. Maximum number of dot1x profiles is limited to
10. This command launches dot1x profile mode for entering profile related
commands such as the mac command. The dot1x static-mab command
assigns the dot1x profile to an interface.
Related
Commands
• dot1x static-mab
• mac
dot1x quiet-period
Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.
C9000 Series
Syntax
dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
seconds Enter the number of seconds. The range is from 1 to 65535.
The default is 60.
Defaults 60 seconds
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
236
802.1X