Reference Guide

auto Enter the keyword auto to authorize a port based on the
802.1X operation result.
force-
unauthorized
Enter the keywords force-unauthorized to forcibly
deauthorize a port.
Defaults none
Command Modes Auto
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information The authenticator completes authentication only when port-control is set to
auto.
dot1x profile
Configure a dot1x profile to define a list of trusted supplicant MAC addresses.
C9000 Series
Syntax
[no] dot1x profile profile-name
Parameters
profile-name Enter a dot1x profile-name. The profile name length is
limited to 32 characters.
Defaults None
Command Modes CONFIGURATION
Error Strings NONE
802.1X
235