Reference Guide

debug dot1x
Display 802.1X debugging information.
C9000 Series
Syntax
debug dot1x [all | auth-pae-fsm | backend-fsm | eapol-pdu]
[interface interface]
Parameters
all Enable all 802.1X debug messages.
auth-pae-fsm Enable authentication PAE FSM debug messages.
backend-fsm Enable backend FSM debug messages.
eapol-pdu Enable the EAPOL frame trace and related debug messages.
interface interface Restricts the debugging information to an interface. The
interface option is available only when the interface is
either operationally up or dot1x related interface
configuration exists before enabling debugging for that
interface.
Defaults Disabled
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the C-Series and S-Series.
224
802.1X