Reference Guide

udf-tcam
for the current UDF TCAM profiles
configuration
uplink-state-
group
for the uplink state group
configuration
users
for the current users configuration
vlt
for the current VLT configuration
vrf
for the current VRF configuration
vxlan
for the current Vxlan instances
configuration
wred-profile
for the current wred-profile
configuration
configured (OPTIONAL) Enter the keyword configuration to display
line card interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the
checksum for the running configuration and the start-up
configuration.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information The status option allows you to display the size and checksum of the running
configuration and the startup configuration.
Example
Dell#show running-config
Current Configuration ...
! Version 9.2(1.0B2)
! Last configuration change at Thu Mar 6 02:10:35 2014 by
default
!
boot system primary system: A:
boot system secondary system: A:
216
File Management