Reference Guide

Parameters
file-url (OPTIONAL) Enter the following location keywords and
information:
• For a file on the internal flash, enter flash:// then the
filename.
• For a file on an FTP server, enter ftp://
user:password@hostip/filepath.
• For a file on an NFS-mounted system, enter nfsmount://
<mount-point/filepath>
NOTE: While switching to a remote NFS file system, it is
mandatory to specify the mount-point that indicates the
working directory on the NFS file system. You cannot enter
the root directory of the remote NFS file system.
• For a file on a TFTP server, enter tftp://hostip/filepath.
• For a file on the USB port, enter usbflash://filepath.
NOTE: The port extender information is displayed only when
the extended bridge feature is enabled.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the
relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
NOTE: A filepath that contains a dot ( . ) is not supported.
Example
Dell#show os-version
RELEASE IMAGE INFORMATION :
---------------------------------------------------------------------
Platform Version Size ReleaseTime
C-Series:C9000 9.9(0.0) 125192571 Sep 8 2015 06:08:13
File Management
209