Reference Guide

62
Virtual Router Redundancy Protocol
(VRRP)
Virtual router redundancy protocol (VRRP) is supported by the Dell Networking operating system.
IPv4 VRRP Commands
The following are IPv4 VRRP commands.
advertise-interval
Set the time interval between VRRP advertisements.
C9000 Series
Syntax
advertise-interval {seconds | centisecs centisecs }
To return to the default settings, use the no advertise-interval command.
Parameters
seconds Enter a number of seconds. The range is from 1 to 255. The
default is 1 second.
centisecs
centisecs
Enter the keyword centisecs followed by the number of
centisecs in multiple of 25 centisecs. The range is 25 to
4075 centisecs in multiples of 25 centisecs.
Defaults 1 second or 100 centisecs.
Command Modes INTERFACE-VRRP
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Added support for centisecs on the Z9500.
9.5(0.0) Added support for centisecs on the Z9000, S6000, S4820T,
S4810, and MXL.
Virtual Router Redundancy Protocol (VRRP)
2071