Reference Guide

ntp disable
Prevent an interface from receiving NTP packets.
C9000 Series
Syntax
ntp disable
To re-enable NTP on an interface, use the no ntp disable command.
Defaults Disabled (that is, if you configure an NTP host, all interfaces receive NTP packets)
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
ntp master <stratum>
Configure an NTP master and peers.
C9000 Series
Syntax
ntp master <stratum>
Parameters
ntp
master<stratum>
Enter the stratum number to identify the NTP Server's
hierarchy.
Defaults Not configured.
Command Modes CONFIGURATION
System Time and Date
2009