Reference Guide

snmp-server contact
Configure contact information for troubleshooting this SNMP node.
C9000 Series
Syntax
snmp-server contact text
To delete the SNMP server contact information, use the no snmp-server
contact command.
Parameters
text Enter an alphanumeric text string, up to 55 characters long.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
snmp-server context
Configure a new context string for SNMP (SNMPv3) server.
C9000 Series
Syntax
snmp-server context {line}
To remove a user from the SNMP group, use the no snmp-server context
{line} command.
Parameters
line Enter the context string (max 32 characters), on the host
that connects to the agent.
Defaults NONE.
1914
Simple Network Management Protocol (SNMP) and Syslog