Reference Guide

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.4.1.0 Introduced

Usage Information The system must have the default CAM profile with the default microcode before

you enable L2PT.

protocol-tunnel rate-limit

Enable traffic rate limiting per box.

C9000 Series

Syntax

protocol-tunnel rate-limit rate

To reset the rate limit to the default, use the no protocol-tunnel rate-limit

rate command.

Parameters

rate Enter the rate in frames per second. The range is from 64 to

320 Kbps.

Defaults no default rate-limit.

Command Modes INTERFACE VLAN