Reference Guide

Related
Commands
forward-delay — changes the wait time before RSTP transitions to the Forwarding
state.
max-age — changes the wait time before RSTP refreshes the protocol
configuration information.
max-age
To maintain configuration information before refreshing that information, set the time interval for the
RSTP bridge.
C9000 Series
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
max-age Enter a number of seconds that the system waits before
refreshing configuration information. The range is from 6 to
40 seconds. The default is 20 seconds.
Defaults 20 seconds
Command Modes CONFIGURATION RSTP (conf-rstp)
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related
Commands
forward-delay — changes the wait time before RSTP transitions to the Forwarding
state.
Rapid Spanning Tree Protocol (RSTP)
1741