Reference Guide

To remove the bandwidth percentage, use the no bandwidth-percentage
command.
Parameters
percentage Enter the percentage assignment of weight to the class/
queue. The range is from 1 to 100% (granularity 1%).
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-out)
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.1.9.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.2.1.1 Introduced on the E-Series.
Usage Information
The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages
given to all eight classes exceeds 100%, the bandwidth percentage automatically
scales down to 100%.
Related
Commands
qos-policy-output — creates a QoS output policy.
class-map
Create a class map. Class maps differentiate traffic so that you can apply separate quality-of-service
policies to each class.
C9000 Series
Syntax
class-map {match-all | match-any} class-map-name [layer2] [cpu-
qos]
Parameters
match-all Determines how packets are evaluated when multiple
match criteria exist. Enter the keywords match-all to
determine that the packets must meet all the match criteria
in order to be a member of the class.
match-any Determines how packets are evaluated when multiple
match criteria exist. Enter the keywords match-any to
1690
Quality of Service (QoS)