Reference Guide

Parameters
interface interface (OPTIONAL) Enter the keyword interface and the
interface type, slot/port numbers or port-channel number
to specify the port(s) for which you want to display PVLAN
information. Enter only a slot ID to display the PVLAN status
for all ports on a line card. The valid values are:
• port-channel port-channel-number
• tengigabitethernet [slot-id | slot/port]
• fortygigE [slot-id | slot/port]
• peGigE[pe-id/stack-unit/port
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information This command has two types of display — a list of all PVLAN interfaces or for a
specific interface. Examples of both types of output are shown below.
The following describes the show interfaces private-vlan command shown
in the examples below.
Field Description
Interface Displays the type of interface and associated slot and port
number.
Vlan Displays the VLAN ID of the designated interface.
PVLAN-Type Displays the type of VLAN in which the designated interface
resides.
Interface Type Displays the PVLAN port type of the designated interface.
Private VLAN (PVLAN)
1671