Reference Guide

Parameters
vlan-list Enter the list of secondary VLANs to associate with the
selected primary VLAN. The list can be in comma-delimited
or hyphenated-range format, following the convention for
the range input.
Defaults none
Command Modes INTERFACE VLAN
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information The list of secondary VLANs can be:
• Specified in comma-delimited or hyphenated-range format.
• Specified with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
• private-vlan mode — sets the mode of the selected VLAN to community,
isolated, or primary.
• show interfaces private-vlan — displays the type and status of the PVLAN
interfaces.
• show vlan private-vlan — displays the PVLANs and/or interfaces that are part of
a PVLAN.
• switchport mode private-vlan — sets PVLAN mode of the selected port.
show interfaces private-vlan
Display type and status of PVLAN interfaces.
C9000 Series
Syntax
show interfaces private-vlan [interface interface]
1670
Private VLAN (PVLAN)