Reference Guide

Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.7.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.7.1.0 Introduced on the E-Series.
Related
Commands
monitor session — enables a monitoring session.
monitor session
Create a session for monitoring traffic with port monitoring.
C9000 Series
Syntax
monitor session session-ID (type { rpm | erpm })
To delete a session, use the no monitor session session-ID command.
To delete all monitor sessions, use the no monitor session all command.
Parameters
session-ID Enter a session identification number. The range is from 0 to
65535.
type rpm | erpm Specifies one of the following type:
• rpm: to create remote port monitoring session.
1658
Port Monitoring