Reference Guide

Field Description
Ver/Mode Displays the PIM version number for each VLAN interface
with PIM-SM snooping enabled:
• v2 = PIM version 2
• S = PIM Sparse mode
Nbr Count Displays the number of neighbors learned through PIM-SM
snooping on the interface.
DR Prio Displays the Designated Router priority value configured on
the interface (ip pim dr-priority command).
DR Displays the IP address of the Designated Router for that
interface.
Example (#2)
Dell#show ip pim snooping interface
Interface Ver Nbr DR DR
Count Prio
Vlan 2 v2 3 1 165.87.32.2
show ip pim snooping tib
Display information from the tree information base (TIB) PIM-SM snooping discovered about multicast
group members and states.
C9000 Series
Syntax
show ip pim snooping tib [vlan vlan-id] [group-address [source-
address]]
Parameters
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display TIB information PIM-
SM snooping discovered on a specified VLAN. The valid
VLAN IDs range is from 1 to 4094.
group-address (OPTIONAL) Enter the group address in dotted decimal
format (A.B.C.D) to display TIB information PIM-SM
snooping discovered for a specified multicast group.
source-address (OPTIONAL) Enter the source address in dotted decimal
format (A.B.C.D) to display TIB information PIM-SM
snooping discovered for a specified multicast source.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1596
PIM-Sparse Mode (PIM-SM)