Reference Guide

state (OPTIONAL) Enter the keyword state to view PIM state
changes.
timer [assert |
hello | joinprune |
register]
(OPTIONAL) Enter the keyword timer to view PIM timers.
Enter one of the optional parameters:
• assert: to view the assertion timer
• hello: to view the PIM neighbor keepalive timer
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer
Defaults Disabled.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
ip pim dr-priority
Change the designated router (DR) priority for the interface.
C9000 Series
Syntax
ip pim dr-priority priority-value
To remove the DR priority value assigned, use the no ip pim dr-priority
command.
Parameters
priority-value Enter a number. Preference is given to larger/higher
number. The range is from 0 to 4294967294. The default is
1.
1560
PIM-Source Specific Mode (PIM-SSM)