Reference Guide

show hardware pe
Display input and output traffic statistics and other operational information about a specified hardware
component.
C9000 Series
Syntax
show hardware pe pe-id stack-unit unit number {cpu | drops |
stack-port | unit}
Parameters
pe pe-id stack
unit unit-number
Enter pe pe-id stack-unit unit number parameters
with a command option to display hardware statistics from
the specified port extender (PE) and stack-unit. The port
extender ID range is from 0 to 255 and the stack-unit ID
range is from 0 to 7. The command options are:
• cpu data-plane statistics: Displays data-plane
statistics, including the
bc pci driver statistics for the
device.
• drops unit unit number [user—port {port
{
port-num | range}]: Displays the number of
internal drops of control-plane and protocol control
packets on the port specified. User port range is 1–51.
• stack-port Displays traffic statistics for the stacking
ports on a specified PE.
• unit unit-number to view with the following options:
– counters: Displays the traffic counters.
– details: Displays more detailed hardware
information.
– port-stats: Displays the internal statistics on a per-
port basis.
– register: Displays the internal registers.
– table-dump: Displays the tables from the bShell.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
PE Stacking
1537