Reference Guide

Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information
The show pe pe-id system output displays detailed summary on different
hardware and software components of all the stack units attached to a port
extender. You can use the brief option to view a short summary of the stack-
units attached to a port extender. Use the
stack-port status to view the status
of the stack-units attached to a port extender. The stack-port topology option
allows you to view whether the stack is forming a daisy chain or a ring topology.
Use the stack-unitunit—number option to display the detailed summary of both
hardware and software components of a specific stack-unit.
Example: pe pe-id
system
Dell#show pe 1 system
Stack MAC : 6c:c0:00:43:09:90
-- Unit 1 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : C1048P - 48-port GE
Current Type : C1048P - 48-port GE
Master priority : 2
Hardware Rev : 5.0
Num Ports : 52
Up Time : 22 hr, 40 min
Dell Networking OS Version : 1-0(0-4092)
Jumbo Capable : yes
POE Capable : yes
FIPS Mode : disabled
Burned In MAC : 6c:c0:00:43:09:90
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
---- ---- ------- -------- ---------- --------------
1 0 up AC NA NA
1 1 absent NA NA
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
----- ---- ---------- ------ ------ ----- --------
1 0 up up 9056 up 9056
Speed in RPM
Dell#
Dell#show pe 1 system brief
Stack MAC : 6c:c0:00:43:09:90
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
---- ---------- ------------ ---------- ------- ----------
-------
0 Standby not present
1534
PE Stacking