Reference Guide

summary (OPTIONAL) Enter the keyword summary to display brief
information about IFM clients.
ifagt number Enter the keyword ifagt then the number of an interface
agent to display software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface
IDs then the slot/port information to display interface
control block information for that interface:
• For a Port Channel interface, enter the keyword port-
channel
then a number: The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
linecard slot-id Enter the linecard slot-id parameters to specify the
switch ports on a line card. The range of slot IDs is from 0 to
11.
trace-flags Enter the keyword trace-flags to display IFM information
for internal trace flags.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
7.6.1.0 Introduced for the C-Series and S-Series.
Example
Dell# show software ifm clients summary
ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp
IPM 0 0x00000000 0x00000000 0x90ff71f3 0x021e0e81 31
RTM 0 0x00000000 0x00000000 0x800010ff 0x01930000 43
VRRP 0 0x00000000 0x00000000 0x803330f3 0x00400000 39
152
Control and Monitoring