Reference Guide

ipv6 router ospf
Enable OSPF for IPv6 router configuration.
C9000 Series
Syntax
ipv6 router ospf process-id [vrf vrf-name]
To exit OSPF for IPv6, use the no ipv6 router ospf process-id command.
Parameters
process-id
Enter the process identification number. The range is from 1
to 65535.
vrf vrf-name (Optional) Enter the keyword vrf and the name of the VRF to
install IPv6 routes in that VRF.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Added support for VRF.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
maximum-paths
Enable the software to forward packets over multiple paths.
C9000 Series
Syntax
maximum-paths number
To disable packet forwarding over multiple paths, use the no maximum-paths
command.
1496
Open Shortest Path First (OSPFv2 and OSPFv3)