Reference Guide

Version Description
9.4(0.0) Added support for VRF on all platforms (Except MXL and
STOMP).
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage Information
This command is useful in isolating routing problems between the OSPF and the
RTM. For example, if a route is missing from the RTM/FIB but is visible from the
display output of this command, the problem is with downloading the route to the
RTM.
This command has the following limitations:
• The display output is sorted by prefixes; intra-area ECMP routes are not
displayed together.
• For Type 2 external routes, Type 1 cost is not displayed.
Example
Dell#show ip ospf 100 route
Prefix Cost Nexthop Interface Area Type
1.1.1.1 1 0.0.0.0 Lo 0 0 Intra-Area
3.3.3.3 2 13.0.0.3 Te 0/47 1 Intra-Area
13.0.0.0 1 0.0.0.0 Te 0/47 0 Intra-Area
150.150.150.0 2 13.0.0.3 Te 0/47 - External
172.30.1.0 2 13.0.0.3 Te 0/47 1 Intra-Area
Dell#
show ip ospf statistics
Display OSPF statistics.
C9000 Series
Syntax
show ip ospf [process-id | vrf vrf-name] statistics global |
[interface name {neighbor router-id}]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
Open Shortest Path First (OSPFv2 and OSPFv3)
1461