Reference Guide

Usage Information The following describes the show spanning-tree msti 5 guard command
shown in the following example.
Field Description
Interface Name MSTP interface.
Instance MSTP instance.
Sts Port state: root-inconsistent (INCON Root), forwarding
(FWD), listening (LIS), blocking (BLK), or shut down (EDS
Shut).
Guard Type Type of STP guard configured (Root, Loop, or BPDU guard).
Example (Guard)
Dell#show spanning-tree msti 5 guard
Interface
Name Instance Sts Guard type
------------------------------------
Te 0/1 5 INCON(Root) Rootguard
Te 0/2 5 FWD Loopguard
Te 0/3 5 EDS(Shut) Bpduguard
spanning-tree
Enable the multiple spanning tree protocol on the interface.
C9000 Series
Syntax
spanning-tree
To disable the multiple spanning tree protocol on the interface, use the no
spanning-tree command.
Parameters
spanning-tree Enter the keywords spanning-tree to enable the MSTP on
the interface.
Defaults Enable.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
1342
Multiple Spanning Tree Protocol (MSTP)