Reference Guide

Version Description

9.9(0.0) Introduced on the C9010.

9.5(0.1) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

6.2.1.1 Introduced

ip msdp mesh-group

To be a member of a mesh group, configure a peer.

C9000 Series

Syntax

ip msdp mesh-group {name} {peer address}

To remove the peer from a mesh group, use the no ip msdp mesh-group

{name} {peer address} command.

Parameters

name Enter a string of up to 16 characters long for as the mesh

group name.

peer address Enter the peer address in a dotted decimal format (A.B.C.D.).

Defaults Not configured.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.