Reference Guide

treated as the default peer. If no access list is specified, then
all SAs from the peer are accepted.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added the list option and removed the prefix-list
option.
7.4.1.0 Introduced
Usage Information If a list is not specified, all SA messages received from the default peer are
accepted. You can enter multiple default peer commands.
ip msdp log-adjacency-changes
Enable logging of MSDP adjacency changes.
C9000 Series
Syntax
ip msdp log-adjacency-changes
To disable logging, use the no ip msdp log-adjacency-changes command.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1316
Multicast Source Discovery Protocol (MSDP)