Reference Guide

To discontinue collection of debug information for the MLD host transactions, use
the no debug ipv6 mld_host command.
Parameters
int-count Enter the keyword count to indicate the number of
required debug messages.
interface type Enter the following keywords and slot/port information:
• For a 10G Ethernet interface, enter the keyword
tengigabitethernet then the slot/port information.
• For a 40G interface, enter the keyword fortyGigE then
the slot/port information.
• For a management interface, enter the keyword
managementinterface then the slot/port information.
• For a port-channel interface, enter the keywords port-
channel
then the slot/port information.
• For a VLAN interface, enter the keyword vlan then the
slot/port information.
Default Disabled
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
Usage Information To debug the MLD protocol for all ports or for specified ports, use the debug
ipv6 mld_host command. When you execute the debug ipv6 mld_host, the
following information is displayed:
• when a query is received
• when a report is sent
• when a multicast joins or leaves a group
• why an MLD query is rejected
Multicast
1309