Reference Guide

Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the S-Series.

7.6.1.0 Introduced on the C-Series.

7.4.1.0 Introduced on the E-Series.

advertise dot3-tlv

Configure the system or an interface to advertise IEEE 802.3at extended power-via-mdi.

C9000 Series

Syntax

advertise dot3-tlv power-via-mdi

To remove the advertised dot3–tlv, use the no advertise dot3–tlv power-

via-mdi command

Parameters

power-via-mdi Enter the keyword power—via-mdi to advertise IEEE

802.3at power-via-mdi TLV.

Defaults Disabled

Command Modes

• LLDP CONFIGURATION (conf-lldp)

• INTERFACE LLDP CONFIGURATION (conf-if-interface-lldp)