Reference Guide

ff02::2
ff02::1:ff00:8
ff02::1:ffff:6f08
ND MTU is 0
ICMP redirects are not sent
DAD is enabled, number of DAD attempts: 3
ND reachable time is 27000 milliseconds
ND base reachable time is 30000 milliseconds
ND advertised reachable time is 0 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 200 to 600 seconds
ND router advertisements live for 1800 seconds
ND advertised hop limit is 64
IPv6 hop limit for originated packets is 64
Dell# show ipv6 interface linecard 1 configured | grep ff02
ff02::1
ff02::2
ff02::1:ff00:6
ff02::1:ffff:6f08
ff02::1
ff02::2
ff02::1:ff00:4
ff02::1:ffff:6f08
show ipv6 mld_host
Display the IPv6 MLD host counters.
C9000 Series
Syntax
show ipv6 mld_host
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Neworking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information The following describes the show ipv6 mld-host command shown in the
following example.
1208
IPv6 Basics