Reference Guide

show cam-ipv6 extended-prefix
Display the currently configured and next-boot settings for extended IPv6 prefixes (/65 to /128) in LPM
CAM.
C9000 Series
Syntax
show cam-ipv6 extended-prefix
Defaults None
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.3(0.1) Introduced on the S6000.
Usage Information You can use this command to view the maximum number of extended IPv6 prefix
entries supported in LPM CAM. The output displays the current value and the new
value applicable after a switch reload.
Example
Dell#show cam-ipv6 extended-prefix
Cam-Ipv6-LPM Extended Prefix
--------------------------------
Current Settings
cam-ipv6-max-/65-to-/128-Prefix : 2048
Dell(conf)#
show ipv6 cam linecard
Display the IPv6 CAM entries for the specified line card.
C9000 Series
Syntax
show ipv6 cam linecard slot id port-set number [vrf vrf-name]
[X:X:X:X::X | summary]
Parameters
slot-id Displays the cam entries for the mentioned linecard id.
IPv6 Basics
1201