Reference Guide

TenGigabitEthernet 1/0-1,5-6,10-11,15,17,19,21
ICMP packet debugging is on for
TenGigabitEthernet 1/0,2,4,6,8,10,12,14,16
DHCP Server:
DHCP server packet debugging on
Dell#
show environment
View system component status (for example, fan, power supply, and temperature).
C9000 Series
Syntax
show environment [all | fan | linecard slot-id | media | pe pe-id
| pem | thermal-sensors]
From a PE console, use show environment [all | fan | pem | stack-unit
| thermal-sensors]
thermal-sensors Enter the keyword thermal-sensors to display only temperatures and thresholds
for the system and switching core, and port modules.
Parameters
all Enter the keyword all to view all components.
fan Enter the keyword fan to view information on the fans. The
output of this command is chassis dependent.
linecard Enter the keyword linecard to view information on the
linecard environment status.
pe pe-id Enter the keyword pe and the port extender (PE) ID to display
environment status for PE. The PE ID range is from 0 to 255.
NOTE: The pe option is only available when the extended
bridge feature is enabled.
pem Enter the keyword pem to view only information on power
entry modules.
stack-unit Enter the keyword stack-unit to view information on stack-
unit.
media Enter the keyword media to view information on optical
media transceivers.
thermal-sensors Enter the keyword thermal-sensors to display only
temperatures and thresholds for the system and switching
core, and port modules.
Default Display status information on all system components.
Control and Monitoring
119