Reference Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
CAUTION: Use this command only when you are working directly with a
technical support representative to troubleshoot a problem. Do not use this
command unless a technical support representative instructs you to do so.
show cpu-traffic-stats
View CPU traffic statistics.
C9000 Series
Syntax
show cpu-traffic-stats [cp | rp | linecard {slot-id | pe ]
Parameters
number Specify an interface number. The number of interfaces
range from 1 to 1568.
all Enter the keyword all to display traffic statistics on all the
interfaces.
cp Enter the keyword cp to display traffic statistics on the
Control Processor CPU.
rp Enter the keyword rp to display traffic statistics on the
Route Processor CPU.
pe Enter the keyword pe to display traffic statistics on the Port
Extender.
Defaults Display CPU traffic statistics for all switch CPUs (Control Processor and Route
Processor).
Command Modes EXEC
Example
Dell#show cpu-traffic-stats
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control and Monitoring
113