Reference Guide

[11/20 15:47:23]: CMD-(CLI):[interface tengigabitethernet
0/3]by default from console
[11/20 15:47:23]: CMD-(CLI):[ip address 5.5.5.1 /24]by default
from console
[11/20 15:47:23]: CMD-(CLI):[no shutdown]by default from
console
[11/20 15:47:23]: CMD-(CLI):[interface tengigabitethernet
0/4]by default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface tengigabitethernet
0/5]by default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 21:17:35]: CMD-(CLI):[line console 0]by default from
console
[11/20 21:17:36]: CMD-(CLI):[exec-timeout 0]by default from
console
[11/20 21:17:36]: CMD-(CLI):[exit]by default from console
[11/20 21:19:25]: CMD-(CLI):[show command-history]by default
from console
Dell#
show console lp
View the buffered boot-up log of a line card, Route Processor or Control Processor CPU, including
background resets, calls, and initialization, on the console.
C9000 Series
Syntax
show console {lp slot-id | rp | cp}
Parameters
lpslot-id Enter a line-card slot number to view the boot-up log of a
line-card (LP) processor. The range of the slot IDs is from 0
to 2.
rp Enter the rp keyword to view the boot-up log for the Route
Processor CPU.
cp Enter the cp keyword to view the boot-up log for the
Control Processor CPU.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
112
Control and Monitoring