Reference Guide

Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information
If the port channel is a VLT port channel, an asterisk (*) after the port channel
number (Po 100*) indicates the port channel is locally down and that a remote VLT
port is up.
Example
Dell#show ip igmp snooping mrouter
Interface Router Ports
Vlan 2 Te 1/3, Po 1
Dell#
Related
Commands
• ip igmp snooping mrouter — configures a static connection to the multicast
router.
• show ip igmp groups — view groups.
show ip igmp snooping groups
Display snooping related information for all the IGMP groups and interfaces or a single group belonging
to a specified interface.
C9000 Series
Syntax
show ip igmp snooping groups [group-address [detail] | detail |
interface [group-address [detail]]]
Parameters
snooping Enter the keyword snooping to display snooping related
information.
group-address (OPTIONAL) Enter the group address in dotted decimal
format to view information on that group only.
interface (OPTIONAL) Enter the interface type and slot/port
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
Internet Group Management Protocol (IGMP)
1079