Reference Guide

To view the current options set for the service timestamps command, use the
show running-config command.
show alarms
View alarms for the system Core, switching core, port modules, fan trays, and power supplies.
C9000 Series
Syntax
show alarms [pe pe-id | threshold]
Parameters
pe pe-id (OPTIONAL) Enter the keyword pe to display the alarms for port extender
(PE). The PE ID range is from 0 to 255.
threshold (OPTIONAL) Enter the keyword threshold to display the temperature
thresholds set for the line cards, RPM, SFMs, and PE (when configured).
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Examples
Dell#show alarms
-- Minor Alarms --
Alarm Type Duration
---------------------------------------------------------------------------
No minor alarms
106
Control and Monitoring