Administrator Guide

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9 (0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.1.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

Usage Information If you do not specify parameters and enter service timestamps, it appears as service timestamps debug uptime in

the running-configuration.

To view the current options set for the service timestamps command, use the show running-config

command.

show alarms

View alarms for the system Core, switching core, port modules, fan trays, and power supplies.

C9000 Series

Syntax

show alarms [pe pe-id | threshold]

Parameters

pe-id

(OPTIONAL) Enter the keyword pe to display the alarms for port extender (PE). The PE

ID range is from 0 to 255.

threshold (OPTIONAL) Enter the keyword threshold to display the temperature thresholds set

for the line cards, RPM, SFMs, and PE (when configured).

Command Modes

• EXEC

• EXEC Privilege