Administrator Guide

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.1.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series and E-Series.

E-Series Original command.

Commands

exit — returns to the lower command mode.

exec-timeout

Set a time interval that the system waits for input on a line before disconnecting the session.

C9000 Series

Syntax

exec-timeout minutes [seconds]

To return to default settings, use the no exec-timeout command.

Parameters

minutes

Enter the number of minutes of inactivity on the system before disconnecting the current

session. The range is from 0 to 35791. The default is 10 minutes for the console line and

30 minutes for the VTY line.

seconds

(OPTIONAL) Enter the number of seconds. The range is from 0 to 2147483. The default

is 0 seconds.

Defaults 10 minutes for console line; 30 minutes for VTY lines; 0 seconds

Command Modes LINE

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.