Administrator Guide

Related
Commands
show ip bgp ipv6 unicast flap-statistics – views BGP flap statistics.
clear ip bgp ipv6 unicast
Reset MBGP sessions.
C9000 Series
Syntax
clear ip bgp ipv6 unicast * ipv6-address prefix-length [dampening | flap-
statistics] peer-group]
Parameters
* Enter the character * to clear all peers.
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in the /x
format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
dampening (OPTIONAL) Enter the keyword dampening to clear route flap dampening information.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to reset the flap statistics on all
prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keywords peer-group to clear all members of a peer-group.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
clear ip bgp ipv6 unicast dampening
Clear information on route dampening.
C9000 Series
Syntax
clear ip bgp dampening ipv6 unicast [network network-mask]
Parameters
network (OPTIONAL) Enter the IPv6 network address in x:x:x:x::x format.
network-mask If you enter the network address, then enter the network mask, from 0 to 128.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
Border Gateway Protocol 431