Administrator Guide

Parameters
vrf vrf-name (OPTIONAL) Enter the keywords vrf and then the name of the VRF to view information
either on all routes with community attributes or specific BGP community routes
corresponding to that VRF.
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 followed by the keyword unicast to view
information related only to ipv4 unicast routes.
ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to view
information related only to ipv4 multicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view
information related only to ipv6 unicast routes.
community-
number
Enter the community number in AA:NN format where AA is the AS number (2 bytes) and
NN is a value specific to that autonomous system.
You can specify up to eight community numbers to view information on those community
groups.
local-AS
Enter the keywords local-AS to view all routes with the COMMUNITY attribute of
NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03) community attribute must
not be advertised to external BGP peers.
no-advertise
Enter the keywords no-advertise to view all routes containing the well-known
community attribute of NO_ADVERTISE.
All routes with the NO_ADVERTISE (0xFFFFFF02) community attribute must not be
advertised to other BGP peers.
no-export
Enter the keywords no-export to view all routes containing the well-known community
attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community attribute must not be
advertised outside a BGP confederation boundary.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
To view the total number of COMMUNITY attributes found, use the show ip bgp summary command. The
text line above the route table states the number of COMMUNITY attributes found.
Border Gateway Protocol 377