Administrator Guide

show mac access-lists
Display all of the Layer 2 ACLs configured in the system, whether or not they are applied to an interface, and the count of matches/
mismatches against each ACL entry displayed.
C9000 Series
Syntax
show mac access-lists [acl_name word | interface } {in | out | interface}
Parameters
access-list Displays information on all L2 access-lists configured.
acl_name word Enter the acl_name word , up to 140 characters, for specified access-list.
interface interface Enter the keyword interface then the one of the following keywords and slot/port or
number information:
• For a Port Channel interface, enter the keyword port-channel and then enter a
number. The C-Series and S-Series range is from 1 to 4096.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet and
then enter the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE and then enter
the slot/port information.
• For a VLAN interface, enter the keyword VLAN followed by the vlan id.
• For a PE Gigabit Ethernet interface, enter the keyword peGigE then the pe-id/
stack-unit/ port-id information.
in Display information of L2 ingress access-list configured to an interface.
out Display information of L2 egress access-list configured to an interface.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.4.1.0 Introduced.
Usage information
This command displays ingress or egress L2 access-list information based on a given option.
If no ingress or egress access-list is attached to an interface, no information displays and you return to the DELL#
prompt.
Example
Dell#show mac access-lists in
Standard mac access list m1
seq 5 permit 11:22:33:44:55:66 count (0 packets)
Standard mac access list m2
seq 5 deny any order 2
seq 10 permit 00:33:00:11:00:77 33:44:55:66:77:88 count (0 packets)
Extended mac access list m3
seq 5 permit host 11:11:11:11:11:11 host 22:22:22:22:22:22 snap eq 600
Dell#
Access Control Lists (ACL) 251