Administrator Guide

Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Usage Information
This command is available with or without RBAC enabled. When RBAC is enabled you can restrict access to audit
and security logs based on the CLI sessions’ user roles. If extended logging is disabled, you can only view system
events, regardless of RBAC user role.
When you enabled RBAC and extended logging:
• Only the system administrator role can execute this command.
• The system administrator and system security administrator roles can view security events and system
events.
• The system administrator role can view audit, security, and system events.
• The network administrator and network operator roles can view system events.
Examples
Dell(conf)#logging extended
Related
Commands
• clear logging auditlog — clears audit log
• show logging auditlog — displays audit log.
logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
C9000 Series
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
Parameters
facility-type (OPTIONAL) Enter one of the following parameters:
• auth (authorization system)
• cron (Cron/at facility)
• deamon (system deamons)
• kern (kernel)
• local0 (local use)
• local1 (local use)
• local2 (local use)
• local3 (local use)
• local4 (local use)
• local5 (local use)
• local6 (local use)
• local7 (local use)
• lpr (line printer system)
• mail (mail system)
• news (USENET news)
• sys9 (system use)
• sys10 (system use)
• sys11 (system use)
• sys12 (system use)
• sys13 (system use)
• sys14 (system use)
1510
Simple Network Management Protocol (SNMP) and Syslog