Administrator Guide
Usage Information This command has two types of display — a list of all PVLAN interfaces or for a specific interface. Examples of
both types of output are shown below.
The following describes the show interfaces private-vlan command shown in the examples below.
Field Description
Interface Displays the type of interface and associated slot and port number.
Vlan Displays the VLAN ID of the designated interface.
PVLAN-Type Displays the type of VLAN in which the designated interface resides.
Interface Type Displays the PVLAN port type of the designated interface.
Status States whether the interface is operationally up or down.
Example (All)
Dell# show interfaces private-vlan
Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Fo 1/52 30 Isolated Host Up
Fo 2/12 20 Community Host Up
Po 10 10 Primary Trunk Up
Example
(Specific)
Dell# show interfaces private-vlan te 2/2
Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Te 2/2 100 Isolated Host Up
Related
Commands
• private-vlan mode – sets the mode of the selected VLAN to community, isolated, or primary.
• show vlan private-vlan – displays the PVLANs and/or interfaces that are part of a PVLAN.
• switchport mode private-vlan – sets PVLAN mode of the selected port.
show vlan private-vlan
Display PVLAN configurations, including member interfaces, type, and status.
C9000 Series
Syntax
show vlan private-vlan [vlan-id | community vlan-id | interface interface |
isolated vlan-id | mapping vlan-id | primary vlan-id]
Parameters
vlan-id
(OPTIONAL) Enter a VLAN ID number to display the PVLAN configuration.
community
vlan-id
(OPTIONAL) Enter the keyword community and a PVLAN ID number to display the
configuration for a community PVLAN.
interface
interface
(OPTIONAL) Enter the keyword interface and specify the interface type and slot/
port numbers or port-channel number to display the PVLAN configuration for a member
interface. The valid values are:
• port-channel port-channel-number
• tengigabitethernet slot/port
• fortygigE slot/port
• peGigE pe-id/stack-unit/port
isolated (OPTIONAL) Enter the keyword isolated and a PVLAN ID number to display the
configuration of an isolated PVLAN.
mapping (OPTIONAL) Enter the keyword mapping to display the community and isolated PVLAN
mapping to primary PVLANs.
primary
vlan-id
(OPTIONAL) Enter the keyword primary and a PVLAN ID number to display the
configuration of a primary PVLAN.
1296 Private VLAN (PVLAN)